MSI showcases an impressive range of products at Computex 2023

Project Zero

In the last few years, back-end motherboards have gained a lot of attention. MSI has launched the B650M Project Zero back-end version of the motherboard, bringing the power supplies, fan headers, and pin pins to the back of the motherboard.

This results in a cleaner case on the front and greatly reduces wiring, allowing the beautiful design of the motherboard, water cooler, and graphics card to be displayed easily. In addition to the special design of the connection port on the back, B650M Project Zero is also equipped with many other features and parameters such as 2 PCIe Gen 4 x4 M.2 slots with M.2 Shield Frozr heatsink, USB 3.2 Gen 2 x2 Type-C port, 2.5G LAN and Wi-Fi 6E.

The B650M Project Zero motherboard has an eye-catching silver tone that blends perfectly into the silver-white Mag Vampiric Project Zero case. The Mag Vampiric Project Zero case contains enough space for wiring according to the motherboard’s back design, making assembly easier.

In addition, the strong compatibility of this case can easily accommodate up to 6 cooling fans and RTX 40 series graphics cards. Most of the case around the case is made of glass, so you can show off all these “quintessence” of Project Zero and create a beauty without dead corners.

fake i _ France I do _ temperature _ _ for NVMe SSD : Spatium Pro Frozr and Pro Frozr +

If the heatsink for the computer before, we only knew about the chassis, the CPU or the GPU, now even the SSD has its own heatsink. MSI in the Computex 2023 event introduced two cooling solutions for their SSDs to make the system more stable and especially help push read / write performance higher than conventional heatsinks.

It is known that the Spatium M570 Pro Frozr will be a passive heatsink, which will apply heatsink to the SSD and take advantage of the airflow in the case to cool (the ability to cool down up to 20 degrees Celsius). Meanwhile, the Frozr + version will have a small fan built into the heatsink to actively cool, providing better performance for the product (the ability to cool down up to 30 degrees Celsius).

Current I do _ temperature _ _ water _ _ Mag Coreliquid E Series

Mag Coreliquid E Series water coolers, which were inspired by the timeline and shape of the sun during an eclipse. It is also an innovative product that combines advanced heat dissipation technology and impressive exterior design. By expanding the contact surface between the water pipes and the copper baseplate of the water block, Mag Coreliquid E Series optimizes heat dissipation for your CPU, in addition to enhanced micropaths to improve system heat dissipation performance.

The block face can be rotated 270 degrees to ensure that the logo is always in the right direction no matter which direction you install it. Users can connect MSI Coreliquid E series heatsinks to MSI motherboards to adjust the fan and water pump speeds thanks to MSI Center software, providing convenience and easy parameter tuning. and achieve optimal performance.

Intel Z790 MAX Series motherboards

There are 4 models of Intel Z790 MAX series motherboards introduced at this event – MEG Z790 ACE MAX, MPG Z790 Carbon Max Wifi, MPG Z790 Edge Max Wifi, and MAG Z790 Tomahawk Max Wifi.

Not only possessing an eye-catching design, they are also upgraded to use the latest generation Wi-Fi 7 solution. MEG Z790 Ace Max and MPG Z790 Carbon Max Wifi are upgraded from 2.5GbE LAN port to 5GbE LAN port, providing strong performance and stability for network connection.

MSI also launched the latest line of ATX 3.0 power supplies that support all lines of NVIDIA GeForce 40 Series graphics cards.

In 2022, MSI has led the industry with the launch of a new line of ATX 3.0 power supplies, including the MEG Ai1300P PCIE5 and MPG A1000G PCIE5 products, which fully support NVIDIA GeForce 40 series graphics cards and are compatible with NVIDIA GeForce 40 series graphics cards. PCIe 5.0 and Intel PSDG (Power Supply Design Guide) standards in the ATX 3.0 standard.

This means that the power supply can take up to twice the load on the system as a whole and 3 times the load on the GPU. When using the included 16 PIN PCIe power supply, it can supply up to 600W of power and limit the use of switches, optimizing assembly space. In addition, MSI also plans to launch the MAG GL ATX 3.0 series power supplies in mid-2023, with a 16-pin power supply header designed in yellow to improve identification when assembled. .

And now, MSI has a promotion program that applies to customers who build PCs using combos of 3 or more MSI components will receive corresponding gift packages.