The computer does not recognize the USB drive, how to identify errors and how to fix them

Tram Ho

Today, we all own at least 2-3 USBs with high capacity mistakenly stored and used for work. Partly because of its popularity, partly because USB is now so cheap, owning it is not too difficult. However, for some reason that your Windows 10 computer shows up and does not accept USB, what to do?

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 1.

This article will suggest what you should do when your Windows 10 computer does not recognize USB, please read along.

1. Reinstall the USB driver for your Windows 10 computer

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 2.

Connect the USB to the computer, right-click the Start button and select Device Manager.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 3.

The Device Manager window appears, navigate to the Universal Serial Bus Controllers hardware group and click the extended menu icon.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 4.

A list of USB drivers appears, find and right-click on the “USB Composite Device” line, select Uninstall device.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 5.

A confirmation window appears, click Uninstall to agree to the selected driver removal task.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 6.

After the uninstall process is complete, continue with the “USB Root Hub” driver.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 7.

When done, remove the USB from the computer, wait about 1 minute and reconnect the USB. Then Windows will proceed to recognize and reinstall the USB.

2. Set Letter and Paths fixed to USB

To prevent the problem of Windows 10 not receiving USB in the future, you can implement a solution to set Letter and Paths fixed for USB as follows.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 8.

After deleting “USB Root Hub” and “USB Composite Device” in Device Manager above, connect the USB device to the computer and open Disk Management from the Start Menu.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 9.

In Disk Management, the USB will be set to “DISK 1”. Right-click the USB partition and select Change Drive Letter and Paths …

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 10.

Click the name of the USB partition and select Add to proceed to set Letter for the partition.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 11.

Once done, launch Registry Editor from the search bar.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 12.

Navigate to “HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Class” and delete 02 keys “4D36E980-E325-11CE-BFC1-08002BE10318” and “4D36E967-E325-11CE-BFC1-08002BE10318”.

Finally, restart the computer for the changes to take effect.

3. Check the device and the USB port again

If the above two methods still do not solve the problem of your USB is not recognized by Windows 10 computer, try all other USB ports of the computer, if any USB port also does not recognize while you plug the mouse, desk If the key is normal, the chances are high that the USB has a problem.

Don’t forget to try plugging the USB stick in some other computer. If the other computers still recognize the USB normally, your computer is likely to be damaged USB ports or software errors. If the other computer does not recognize the USB, then the possibility of your USB is corrupted.

Máy tính không nhận ổ USB, cách nhận diện lỗi và khắc phục - Ảnh 13.

Next, use a soft brush to wipe the dust in the USB slot and secure the USB cable connected from the USB port to the motherboard on the computer (this is mostly done on the desktop) and reconnect the USB to whether it is the connection port or not.

In some cases, you should also try scanning your entire computer for Full Scan with a powerful antivirus software.

Hope the article will be useful for you.

Share the news now

Source : Genk