- Tram Ho
If you’ve ever taken your computer apart, you’ll probably find that there are a lot of hardware components in it. All works in a unified way, there should be nothing to worry about, but if a certain component has problems, it will not bring anything good to your computer.
Active components that generate heat or moving parts tend to fail most often. However, by examining your computer’s hardware, you can detect which hardware is at risk of failure before the problem becomes more serious.
What parts are most damaged in a PC?
The most commonly damaged parts in a computer are the fan, hard drive, CPU, and GPU.
However, RAM is also one of the most fragile components of a computer. Depending on the model and brand, the lifespan of the RAM sticks you purchase may vary and performance may be more stable. RAM is “dead” is one of the common things that most users think of when the computer does not turn on.
There are two things that can kill a well-functioning stick of RAM in the blink of an eye: temperature and voltage. According to the announcement, the operating temperature of the RAM is between 0 degrees Celsius and 85 degrees Celsius. RAM will fail or completely fail if the operating temperature is outside that range. As for the voltage cause of RAM failure, the voltage spike can come from a faulty motherboard or unstable power supply.
The best way to avoid hardware failure problems in your computer, you should regularly perform hardware diagnostic checks is the simplest way. Below are suggestions on how to check hardware on Windows 10 that you should refer to.
What hardware diagnostic tools does Windows 10 provide?
There are 02 hardware diagnostic tools that Microsoft comes equipped with in Windows 10, including Performance Monitor that helps analyze system performance across the computer and Windows Memory Diagnostic that allows memory testing.
1. Performance Monitor
Through Performance Monitor, users can monitor as well as analyze and make judgments about how your computer is managing resources on the system. Performance Monitor can display results as graphs, graphics, or as numerical values. You can use these results to determine which system components need to be upgraded or replaced.
To start Performance Monitor, simply enter its name in the search bar and click on the displayed results.
If you want a quick overview of the system hardware on your computer, just click Reports > System > System Diagnostics > [computer_name].
If you want to dig a little deeper, you can check out live real-time performance graphs from Monitoring Tools > Performance Monitor.
2. Windows Memory Diagnostic
As mentioned above, RAM is a very important piece of hardware in a computer, acting as short-term memory to process data and everything contained in RAM will be lost when you turn off the computer.
There are many warning signs when your RAM is about to fail. Specifically, performance drops, frequent system crashes, video cards sometimes fail to start, data is easily corrupted, and RAM information is incorrect when displayed in Windows System applications.
If you are wondering how to check the “health” of your computer’s RAM, luckily for you, Windows has equipped users with a tool called Windows Memory Diagnostic, which allows you to check the memory status. RAM on the system.
To activate this tool, Windows 10 users can type Windows Memory Diagnostic into the search box and click on the corresponding displayed result.
The Windows Memory Diagnostic dialog box appears, click “Restart now and check for problems (recommended)” to restart the computer and start the process of checking RAM on the system. You need to save your work to avoid data loss due to computer restart.
Windows will restart and the interface of the RAM test on the system will appear. Users only need to let this process take place and complete in a few minutes. After the process is finished, the computer will automatically reboot into Windows.
To view the test results, right-click the Windows 10 Start button, select “Event Viewer” from the menu that appears.
From the Event Windows dialog box that appears, select Windows Logs > System from the menu on the left, then press the “Find” button from the right pane.
In the search box that appears, type “MemoryDiagnostic” and press the “Find Next” button, you will see the results of the RAM test on the system appear at the top of the window that appears, from That knows if the RAM memory is working stably or if there are any problems.
If the result is “no erros”, it means that your RAM is still working stably and there are no errors encountered.
Specialized third-party software
In case if the above 02 tools of Windows 10 do not satisfy you, you can use third-party software suggestions such as MemTest86 , CrystalDiskInfo , HWiNFO , RWEverything ,… The advantages of these software are: they are completely free and give extremely accurate results, in addition to the presentation is also easier to understand than Performance Monitor.
Hope this article will be useful to you.
Source : Genk