“Belly surgery” Vsmart Live 4: Smartphone 4 million “Make in Vietnam” of VinSmart has something special?
- Tram Ho
Vsmart Live 4 is the newest cheap product of VinSmart. In addition to valuable equipment such as Snapdragon 675 chip, 5000mAh battery, 4 cameras … Vsmart Live 4 also marks an important milestone for VinSmart, when this is the first product to be 100% autonomous from this company. hardware design, operating system and manufacturing. So, does this smartphone have anything interesting on the inside?
To be able to “open up” Vsmart Live 4, the first thing users need to do is turn off the device and remove the SIM tray.
To remove the back cover of Vsmart Live 4 is very easy. Users do not even need any tools, just their nails can pry off the back cover of the device.
Users need to be careful when removing the back cover of the device, because there is a cable connecting the fingerprint sensor to the mainboard of the machine.
The structure of Vsmart Live 4 is similar to that of previous Vsmart machines. The machine consists of two boards as the main board (containing the processor chip, wave chip, camera …) above and the secondary board (containing the charging port, headset, battery) below. These two boards are surrounded by two pieces of plastic, preventing components from being damaged by impact.
The user will need to remove the screws and pry the plastic pieces open to see the motherboard of the machine. There are 2 screws (1 above, 1 below) which are stamped void of Vsmart, if this stamp is lost or deformed, the user will lose his warranty benefit.
These are two protective plastic pieces. On these pieces of plastic is code-named “V640”, which is also the code for the Live 4.
In fact, these plastic pieces are not only merely protective, but also contain some components such as vibrators, wave antennas …
Main board of Live 4. Components such as camera, monitor, battery … are all connected as connector, very easy to disassemble.
Users only need to remove the connectors and only 1 screw can remove the motherboard from the machine.
This is the motherboard of Live 4. All important components are shielded in a metal cage.
Likewise, the back of the Live 4 motherboard is also metal cage, but with extra thermal paste.
Cluster of 4 main cameras of the machine.
Selfie camera.
The lower board of Vsmart Live 4 includes charging port, headphone jack.
Live 4’s 5000mAh battery is manufactured by Hunan Gaoyuan Battery company in Hunan, China.
Throughout the abdominal surgery, we can see the appearance of the Vsmart logo on the board many times …
… on the frame …
… or on the back cover of the device.
Vsmart Live 4 is a product that marks the transformation of VinSmart in research and production, but in fact, the internal internal structure of this machine has no significant difference compared to previous products. However, this is not a minus point, because the hardware design of Live 4 not only provides high durability thanks to details such as metal cage, heat sink glue, plastic layer covering the board … it is still very easy to fix.
Source : Genk